0 DAY DAYS DAYS 01:01:02
sE Electronics - X1 Series Large-Diaphragm Condenser Microphone for Vocals, Acoustic Guitar, Electric Guitars and Percussion Bundle with Blucoil Pop Filter Windscreen, and 10-FT Balanced XLR Cable
sE Electronics - X1 Series Large-Diaphragm Condenser Microphone for Vocals, Acoustic Guitar, Electric Guitars and Percussion Bundle with Blucoil Pop Filter Windscreen, and 10-FT Balanced XLR Cable
Promotion Price:
$39.6
Quantity:
In Stock
Quantity:
  
  

Description

sE Electronics X1 A Large-Diaphragm Condenser Microphone
sE Electronics presents one of its most versatile microphones in the X1 A Large-Diaphragm Condenser Mic. It offers superb frequency response, high SPL handling, helpful attenuation and low-cut filters, plus a well-balanced sensitivity level. You can use X1 A for miking vocals, acoustic instruments, amped electric guitars, and even percussions. X1 A is the ultimate choice for a high-quality recording microphone. *NOTE: This condenser microphone requires 48V phantom power to operate.

TECHNICAL SPECS:

  • Element: 2/3" Permanently-Biased Condenser
  • Required Phantom Power: 48V
  • Polar Pattern: Cardioid
  • Frequency Range: 20Hz - 20kHz
  • Low Cut Filter: 100Hz, 6dB/OCT
  • Switchable Attenuation Pad: 20dB
  • Max SPL: 130/150dB (with 0/20dB PAD)
  • Self-Noise 16dB-A
  • SNR: 78dB-A
  • Dynamic Range: 114/134dB (with 0/20dB PAD)
  • Sensitivity: 20mV/Pa (-34dB)
  • Impedance: Less than 50 Ohm
  • Size: 2.25" Diameter; 6.65" Length
  • Weight: 0.9 LB
  • Accessories: Swivel Mic Clip; Thread Adapter

    Also Comes With:

    Blucoil Pop Filter Windscreen
    The premium Blucoil Microphone Pop Filter Windscreen features a 2-layer mesh with a 6-inch diameter. It blocks the air blasted from the user''s mouth and disperses any remaining air pressure. Its unique design lessens the energy of plosive sounds caused by hard consonants such as ''p'', ''b'', and ''g''. You''re reassured that hisses or popping sounds won''t muddle your audio recording.

    Blucoil 10-FT Balanced XLR Cable
    The 10-foot Blucoil cable interconnects your microphone to an audio interface, mixer, or preamp. It is made with premium Male-to-Female Neutrik-equivalent Zinc Alloy connectors and protected with a high-density PVC jacket. The 92% shielding blocks EMI/RFI from ruining your audio signal from EMI/RFI. The OFC wire provides the best possible conductivity and avoids unwanted degeneration.
  • Features & details

    Features

    • DELIVERS PRISTINE, WELL-BALANCED SOUNDS - The sE Electronics X1 A utilizes an improved condenser mic capsule that accurately picks up every nuance of your voice, acoustic guitar, and overhead drums.
    • REDUCES LOW RUMBLES FOR CLEARER RECORDINGS - The switchable Low-Cut Filter eliminates low-frequency noise such as plosives, wind, and footfall noise. It curbs the proximity effect when you''re recording at a short distance.
    • ATTENUATES AUDIO SIGNAL - Use the 20 dB Attenuation Switch to prevent distortion when miking a very loud audio source like a guitar amp. This also thwarts overloading your mic preamp or audio interface.
    • CAN HANDLE LOUD SOUND SOURCES - The versatile X1 A mic is the ideal vocal and instrument microphone with its smooth 20Hz-20kHz frequency range and high 150dB SPL handling.
    • INCLUDES - sE Electronics – X Series Large-Diaphragm Condenser Microphone (X1 A); Swivel Mic Clip; Thread Adapter. Blucoil Audio Microphone Pop Filter Double Layer Mask Shield for Studio Recording and Broadcasting with Stand Clip Stabilization Arm, Swivel Mount. Blucoil 10-Foot Balanced XLR Cable - Premium Series 3-Pin Cable for Microphones, Speakers, and Pro Devices (Male-to-Female).

    Product information

    Product Warranty: For warranty information about this product, please click here